Showing posts with label Lord Elgin. Show all posts
Showing posts with label Lord Elgin. Show all posts
Job Number 220031
Looks like a dot of super glue on the minute hand... That's not a good sign.
This watch is a grade 670, 15/0 size, 21 jewels, made about 1952. It is a Lord Elgin model, really nice watch.
Running well...
I'm not sure why this watch had that tiny dot of glue on the minute hand. The hands went back on just fine.
Running well...
I'm not sure why this watch had that tiny dot of glue on the minute hand. The hands went back on just fine.
Job Number 1700014
This one is a is a grade 351 Elgin, 16 size, 23 jewels, made about 1907.
See the complete album for this project here.
See the complete album for this project here.
Job Number 180109
This is a "before" image. There quite a bit of rust on the hands, and the paint on the dial is marked.
It's possible that this watch was without a crystal for a while, although it has one now. I also see corrosion like this on hands as a result of degassing of some early plastic crystals. These crystals typically turn very yellow, blue or green as they give off a corrosive gas that damages the watch. The crystal on this watch is fine, but it may not be the original one.
This watch is a Lord Elgin model, 21 jewels, one of Elgin's popular 10 size, thin, designs from the the 1940s and early '50s. I like these. They run well and have a nice look.
It's possible that this watch was without a crystal for a while, although it has one now. I also see corrosion like this on hands as a result of degassing of some early plastic crystals. These crystals typically turn very yellow, blue or green as they give off a corrosive gas that damages the watch. The crystal on this watch is fine, but it may not be the original one.
This watch is a Lord Elgin model, 21 jewels, one of Elgin's popular 10 size, thin, designs from the the 1940s and early '50s. I like these. They run well and have a nice look.
Job Number 170014
The motor barrel arbor bearings are jeweled on this movement. Normally, I would not have the jewel in place at this point in assembly. The jewel bezel sits in a recess in the barrel top. Nothing really holds it until the barrel clamp, with its three screws, is in place. Now and then though I run into one of these where the jewel seems somehow stuck to the barrel. As far as I know they did not do anything to fix these in place, but a few of them just don't want to come off. There's no harm in servicing the parts this way, so it's fine. It just takes a little extra care. It hate to damage, or lose, one of these parts.
This is the pallet fork. Note all the chamfered and polished edges... All that extra finish work of course does not have a direct impact on the performance of the watch. But it is meant as an indication of the care and attention to detail in the design and production of the timepiece.
Also, all these polished surfaces are easily damaged with scratches and tool marks. Their condition in a vintage watch says a lot about the skills of the watchmakers that have serviced the movement over its life.
Here is the motor barrel in place and secured.
More about the motor barrel here.
Find out more about Lord Elgin watches here.
See the complete album for this project here:
https://goo.gl/photos/iCDPe98QJDytbtXn9
This is a 23 jewel, 16 size Lord Elgin grade 351, made about 1907.
This is the pallet fork. Note all the chamfered and polished edges... All that extra finish work of course does not have a direct impact on the performance of the watch. But it is meant as an indication of the care and attention to detail in the design and production of the timepiece.
Also, all these polished surfaces are easily damaged with scratches and tool marks. Their condition in a vintage watch says a lot about the skills of the watchmakers that have serviced the movement over its life.
Here is the motor barrel in place and secured.
More about the motor barrel here.
Find out more about Lord Elgin watches here.
See the complete album for this project here:
https://goo.gl/photos/iCDPe98QJDytbtXn9
This is a 23 jewel, 16 size Lord Elgin grade 351, made about 1907.
Elgin Grade 760
Elgin's grade 760 is a 15/0 size, 21 jewel, Lord Elgin wristwatch movement. This great example was made about 1950.
Elgin Grade 450
Many grade 450 Elgin movements are marked Lord Elgin, as this one is. It is a 12 size watch, 21 jewels, made about 1920.
Elgin Grade 760, Animation
The Elgin grade 760 is a 15/0 size, 21 jewel, wristwatch movement.
This Lord Elgin example was made about 1950.
This Lord Elgin example was made about 1950.
Subscribe to:
Posts (Atom)








































