Job Number 220023

Now there's an odd way for a screw head to be broken. It will get replaced.

This movement is an Elgin grade 290, 16 size, 7 jewels, made about 1904. 



The movement cleaned up well and is running nicely. 
It's nice to see one of these inlay dials in a 16 size, they're not common in larger sizes. Also it's in almost perfect condition. These crack and chip easily.



Recased, replacement crystal installed, it's now ready for a few days of testing.

Job Number 220016

This watch was returned to me. The dial has somehow lifted up causing the setting lever to retract fully under the dial, and popping the second hand off. Fortunately the second hand was not lost.

All I can to is set the dial back in place and snug the screws again. Nothing is broken.

Job Numbers 220033

I worked on this one in 2015. It had stopped running, but everything is fine. It's clean, nothing is broken, the mainspring is ok. I did a quick "oil change", and hand cleaning of the escapement (wheel, pallet and balance) and cleaned the balance jewels. Now it running fine, or seems to be. I'd prefer to actually find something wrong and fix it in cases like this.

Formerly job number 150273.

See the album for this project here:
https://photos.app.goo.gl/3PMabHetbaxqCj2RA

New Arrival, Job Number 220033, Formerly 150273

I worked on this one in 2015. It's stopped, looks like just old oil. I started using a better (ie more expensive) oil since then.

Formerly job number 150273.

See the album for this project here:
https://photos.app.goo.gl/3PMabHetbaxqCj2RA
 



Blog Archive