Follow the album for this project here:
Job Number 250006
This movement had trouble dial up. There's several common causes of that, but this movement did not have any of those issues. I tried other jewels, and polishing the pivot (using a balloon chuck, shown here).
Under extra high magnification it looks like the pivot may be bent. It is so slight that I can't be sure I'm not just seeing a reflection. It *really* looks fine.
But having no other ideas left, I changed the staff out. The movement now regulates excellently. Just strange, I would have sworn there was nothing wrong with that staff. But sometimes it just goes like this.
Elgin serial number 13891376 is a grade 368, 18 size, 17 jewels, made about 1909.
Job Number 250127
That's a "repair" I haven't seen before.
There's rust, but honestly o\it's mostly old oil and dirt.
The guard pin is gone.
As in, completely not there.
The roller pin has been replaced with a steel rod.
Fabricating and finishing a replacement guard pin...
The internal end of the lever was bent in an odd way, fixable though.
Elgin serial number 827968 is a grade 6, 18 size, 7 jewels, made about 1881.
Elgin serial number 827968 is a grade 6, 18 size, 7 jewels, made about 1881.
Subscribe to:
Posts (Atom)